Universal Remote Control (URS) CAM-MC - Manual (Page 7)

I
NDOOR
N
ETWORK
C
AMERA
Page 4
Factory Default
Admin ID root
Admin password root
IP address 10.20.30.40
Communicating with the Camera
An IP address is required to view the camera and modify surveillance
options. Once installed, locate the IP address assigned by your router
(which will differ from the default address below). Your router contains a
DHCP table which displays each connected device and its IP address. IP
addresses normally resemble 10.20.30.40 or 192.168.1.xx.
For further information, refer to the router’s documentation.
The camera’s factory default options listed below may have changed
depending upon your router settings made by the Custom Professional
who installed your camera
.
1. Enter the camera’s IP address into the web browser’s address bar.
URC recommends using Internet Explorer to view the live surveillance.
2. The IP camera’s web interface opens. You now have access to the
Live View and Administration sections described next.