Universal Remote Control (URS) SNP-2 - Manual (Page 28)

SNP-2 S
TREAMING
N
ETWORK
P
LAYER
Page 25
Network Properties and Setup
Setup the SNP-2 with either a DHCP or Static IP address and view
it’s network information.
● Set SNP-2 to DHCP (Default)
Setting to DHCP will automatically communicate to the
system’s router to be assigned an IP address.
● Set SNP-2 to Static IP
When Static IP is selected, an IP address must be manually
entered, as well as the information for the subnet mask,
default gateway and DNS server.
● View Network Information
Provides a listing of the SNP-2’s current IP address, subnet
mask, default gateway and DNS server.
Select Done to save your settings.
Select Go Back to return to the previous screen.