Universal Remote Control (URS) SNP-2 - Manual (Page 9)

Page 6
SNP-2 S
TREAMING
N
ETWORK
P
LAYER
Hybrid Total Control System
While the SNP-2 is streaming over the network, its interface can be
viewed and controlled via an HDMI display such as a television or
an audio/video receiver.
1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.
2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
MFS-8 or router.
3. Connect an HDMI cable to the rear of the SNP-2 and an
HDMI TV.
4. Control the SNP-2 from a Total Control interface or from the
television. (Requires the Custom Professional to download
the program to the Total Control system.)
TRC-1080