Cerwin-Vega Professional Audio Mixer CVM-1224FXUSB User Manual
Page 20
20
APPLICATIONS – HOME RECORDING
Setup Procedure
1. Before connecting to microphones and instruments, be sure that all devices are turned off. Also be sure that all
of the mixer’s channel fader and master control faders are set all the way down.
2. For each connection, connect one end of the cable to the relevant microphone or instrument and connect the
other end to the appropriate input jack on the mixer.
3. To avoid causing damage to the speaker, power up the devices in the following order: Peripheral devices ->
mixer -> power amps (or powered speakers)
NOTE: When shutting the system down, turn off the power in the opposite order: Power amps (powered speakers) ->
mixer -> peripheral devices.
NOTE: Where an input channel provides both a MIC INPUT jack and a LINE INPUT jack, you may use either one of these
jack but you may not use both at the same time. Please connect to only one of these jacks on each channel.