Crest Audio CPX 3800 - Manual (Page 20)

p. 20
features overview
3
CPX TM owner’s manual
0 Conn. Mode Select Switch
Depressing the rear panel CONN. MODE select switch connects both
input connectors together in parallel. This directs the same input signal
to both channels and allows one connector to be used with a patch cable
to drive another amplifier. In the OUT position, both input connectors
operate independently. Do not operate the CONN. MODE select switch
with the amplifier powered on. See the sections on Stereo, Parallel and
Bridged Mono Mode for more information.
¡ Amp Mode Select Switch
The rear panel AMP MODE select switch determines if the amplifier is in
stereo (two channels) or in Bridged Mono Mode. Do not operate the AMP
MODE select switch with the amplifier powered on. See the Operations
Mode section for more information on Stereo, Parallel and Bridged Mono
Mode applications.