Crest Audio CPX 3800 - Manual (Page 33)

p. 33
glossary of terms
(for setup)
Stereo Music with two separate channels, usually a left and right
channel.
Mono Music with only one channel.
Crossover An electronic device that separates high and low
frequencies and sends them to different outputs. The sepa-
rate signals are usually sent to a high out and a low out.
Bi-amp The separation of high and low frequencies with a cross-
over, using separate speakers and power amps for each.
Full Range Both high and low frequencies together in a single channel.
Program The signal that is plugged into the amplifier.
Hi-Pass Allows only the high frequencies to pass, blocking the low
frequencies.
Low-Pass Allows only the low frequencies to pass, blocking the high
frequencies.
Mid/High The speaker designed to play everything but the low
frequencies.
Sub The speaker designed for low frequencies only.
Parallel Both speakers or inputs have the same signal. When
referring to speakers, this means plugging the second
speaker into the first speaker and so on.
setup c