C. Crane VersaCorder Dual Speed Recorder - Manual (Page 13)

1) Set the VersaCorder on QUARTER speed for longest record time.
2) Switch VOICE ACTIVATED to “ON”.
3) Press the “PLAY” and “RECORD” Buttons at the same time.
4) Set SENSITIVITY so the recorder starts when someone is talking.
NORMAL OR
QUARTER SPEED
Sensitivity can be set on 1, 2, or 3. Number “1” is the most sensitive
and can be used when there is little background noise and you would
like to record people in a room, such as a meeting. Number “2” works
well when a single person is talking within 2 feet of the microphone.
Number “3” is the least sensitive and can be used to record someone
speaking directly into the microphone (good for high background noise
areas).
The voice activated feature on the VersaCorder can be used with a
police scanner, to save tape, or in a 911 center to record phone calls.
The VersaCorder may also be set up for a timed and voice activated
recording.This might be used to record noises in a room at a certain
time of day. It could also be used to record a conference when you can-
not be there.
1) Follow the above instructions for voice activated recording.
2) Set the timer. See page 10 for instructions on setting the timer.
SENSITIVITY VOICE ACTIVATED
ON/OFF
VersaCorder Page 13
Recording Instructions
Using Voice Activated Recording
Recording Instructions
Using Voice Activated Recording with Timer