C. Crane VersaCorder Dual Speed Recorder - Manual (Page 7)

1) Press and hold the CLOCK Button while setting the time.
2) While holding the CLOCK Button, press the DAY Button and select
the corresponding day as shown on the display.
3) While holding the CLOCK Button, press the HOUR Button until the
appropriate hour and AM/PM is indicated on the display.
4) While holding the CLOCK Button down, press the MIN Button and
select the appropriate minute setting. Each time you press the MIN
Button the seconds reset to “0”.
HOUR
CLOCK
DAY
MIN
VersaCorder Page 7
Setting the Clock and Day
DAY Settings
Seconds
Counter
Current
Time
AM/PM
Indicator