Chauvet DMX-40B - Manual (Page 16)

Playback (Chases)
M A N U A L R U N C H A S E S
This function allows the user to manually step through each individual step in a chase.
Action ™
1) Press and hold PROGRAM button for 3
seconds to enter programming mode.
2) Start a chase by pressing any one of the
CHASE buttons.
3) Press the TAPSYNC/DISPLAY button to
manually step through the chase.
4) Use the BANK buttons to scroll through the
chases.
5) Press and hold the PROGRAM button for 3
seconds to exit programming mode.
Notes ‡
A U T O R U N C H A S E S
Action ™
1) Press any one of the CHASE buttons.
2) Press and release the Auto / Del button.
The corresponding LED will blink.
3) Adjust the SPEED and FADE faders to your
liking.
4) You can override the speed and fade time
by tapping the TAPSYNC/DISPLAY button
(three) times. The chase will now run on the
interval time of the taps.
Notes ‡
CAUTION! The fade setting should never be slower
than the speed setting or the scene will never
complete execution.
M U S I C R U N C H A S E S
Action ™
1) Press any one of the CHASE buttons.
2) Press and release the MUSIC/BANK COPY
buttons. The corresponding LED will blink in
the display.
3) Your chase will now run to sound.
Notes ‡
R U N N I N G S E Q U E N T I A L C H A S E S
Action ™
1) Press either AUTO DEL or MUSIC BANK
COPY buttons to select the trigger mode.
2) Press the CHASE button for each chase
you wish to playback.
3) Adjust the Chase speed by changing the
SPEED fader.
Notes ‡
Chases must already be programmed.
The chases will run in the order they are pressed
DMX-40B User Manual 16 Revised: 2006-12-06 09:36:47