Welch Allyn SureTemp PlusModule - User Manual User Manual
Welch allyn, Suretemp, Plus
Advertising
Table of contents
Document Outline
- OEM Implementation Manual
- Contents
- 1 - Product Overview
- 2 - Functional Description
- 3 - OEM Implementation
- 4 - Specifications
- 5 - Verification Testing
- 6 - Regulatory
- 7 - Part Numbers
- 8 - Communications Protocol
- Introduction
- Packet Structure
- Commands and Responses
- (2900) Send Serial Number
- (2913) Send Temperature Method
- (2936) Send Module Software Version
- (2945) Send Thermometer Probe Mode
- (2949) Send Default Thermometer Probe Mode
- (2A06) Save Data to EEPROM
- (2A07) Recall Data from EEPROM
- (2A12) Set Temperature Method
- (2A35) Set Thermometer Probe Mode
- (2A37) Set Default Thermometer Probe Mode
- (3000) Restart Module
- (3101) Send Digital Input Status
- (3109) Erase Event Log
- (3503) Lock Thermometer Probe
- (3604) Set Temperature Probe
- (9401) Send Thermometer Status No Clear
- (9413) Send Mode Pause For Clinical Device
- (9415) Send Default Thermometer Mode
- (9416) Send 690 Event Log
- (941A) Send Programmable Ambient Bias
- (941C) Send Temperature Record
- (9433) Set Mode Pause For Clinical Device
- (9434) Set Asynchronous Messages Enabled
- (9435) Set Default Thermometer Mode
- (943A) Set Programmable Ambient Bias
- Data Records
- Command and Response Strings: Examples
- Endianness
- String Examples
- (2900) Send Serial Number
- (2936) Send Module Software Version
- (2A12) Set Temperature Method
- (3503) Lock Thermometer Probe
- (9401) Send Thermometer Status No Clear
- (941C) Send Temperature Record - 19 Data Bytes
- (941C) Send Temperature Record - 33 Data Bytes
- (9434) Enable Asynchronous Messages
- (943A) Set Programmable Ambient Bias
- 9 - Quick Start
- 10 - Programmable Ambient Bias
- 11 - Error Codes and Recovery
- Appendix A - Developer’s Kit
- Appendix B - Cleaning