Compex Technologies NetPassage 18A - Manual (Page 150)

141
8. Go to the Protocol section and
select LPR.
9. Next proceed to the LPR Settings
section. In the Queue Name field,
key in ‘usb0’. Please take note that
‘usb0’ is an example. The
appropriate queue name should be
derived from the URL of the printer
that connects to the router.
10. Click on the Next> button to
proceed.
11. After you have successfully
configured the selected port, you
will see the information display in
this window. Click Finish to
complete the port configuration.
Next to install the printer’s driver to your
PC:
1. If you cannot find the printer’s
name in the list, click Have Disk…
Then you need to install the driver
manually.
2. Click on the Next> button to
proceed.