Combi 4010 - Manual (Page 3)

- 3 -
Opening the Stroller
1. Press the pivot
buttons in and
raise pivot
handle.
2. Place one hand
on the handle and
one hand on the
seat. While grasp-
ing the handle,
push the seat
away from the
handle until the
stroller opens
entirely and locks
into the opened
position.
3. Attach Cupholder
to handle.
Attaching & Removing the Front Swivel Wheels
Place front swivel wheel
assembly on the swivel
shaft. The assembly is
secure when it locks onto
the shaft.
Removing the Swivel
Wheels
Press in the square but-
ton located at the bottom
of the wheel holder while
pulling the assembly off of
the swivel shaft.
Release Button
4. Pull the basket frame until it
clicks and locks into place.
Note: The basket locks into a fixed
position and is not moveable.
To lock brakes,
push both brake
levers down.
To unlock
brakes, lift both
brake levers up.
CAUTION
Push the stroller
forward to
ensure
that the brakes
are properly
engaged.
Using the Brakes Using the Front Swivel Wheels
To lock swivels, push both
swivel lock levers down.
To unlock swivels, lift both
swivel lock levers up.
Attaching the Rear Wheels
1. Stand behind the stroller.
2. Locate the small chrome pin
oneach rear stroller leg.
3. Locate the small opening on
each rear wheel assembly.
4. Insert the leg into the wheel
assembly until the small silver
pin locks into the opening. Note:
Attach the rear wheel assemblies to
each stroller leg with the wheel spacer
facing inward.