Combi 4010 - Manual (Page 8)

- 8 -
Using the Travel System Guardrail
1. After removing the Kid’s Tray Guardrail, attach the
Travel System Guardrail by gently slipping it over the
armrest pins until you hear the pins click into posi-
tion. Gently tug on the side, to be sure it is secure.
2. Recline the backrest to the middle position or lower.
3. Lock the “V” slot of the Combi Infant Car Seat/Carrier
over the Travel System Guardrail.
4. Rotate until the foot end of Combi Infant Car Seat/
Carrier locks into the Infant Car Seat/Carrier Locks
located on each side of the handle. Push down on the
foot end of the seat to ensure engagement.
5. Be certain that the Combi Infant Car Seat/Carrier is
securely attached to the stroller by lifting up on the
Combi Infant Car Seat/Carrier handle.
CAUTION
Pull on each side of Travel System Guardrail to
make sure that it is completely attached.
ATTACHING THE TRAVEL SYSTEM GUARDRAIL
Push