WineKeeper MAGNUM Series - Manual (Page 5)

3
Your unit uses a nitrogen or argon cylinder (not included) located remotely and connected to your unit by an 8-foot long braided
hose that has a metal quick disconnect fitting on the end. This hose exits the rear of the unit at the bottom next to the power cords.
The aluminum filter screen on rear attaches with magnets and must be cleaned every 2 months, more often if dusty or dirty. The filter
screen covers the lower vent cover, and must always be in place when unit is operating.
Operating Your Unit
Changing bottles
1. Pinch off the nitrogen clamp.
2. Loosen the thumbwheel.
3. Remove the empty bottle, replace with full bottle.
4. Follow steps 1-7 listed in “Setting Up Your Unit".
CAUTION: Risk of Electric Shock !
This equipment may have two or more power supply cords.
Unplug all cords before moving or servicing this equipment.