Workrite Poise - Manual (Page 6)

6 Workrite Ergonomics 800.959.9675 www.workriteergo.com
Cable Management
Secure Velcro® strips
under side of Extension around
monitor cables, leaving slack
for monitor cables to move freely.
EXTENSION
FOREARM
Note:
To allow free movement of monitor and Arm/Extension, please leave sufficient slack in the cables.
Cable Mount
Strip
Strip
M3 Screws
Attach the Cable Clip to the
back of the Desk Base with the
supplied M3 Screws (o) and put
cables into the Cable Clip.
DESK BASE
1 Thread monitor cables through Cable Mount located on underside of Forearm.
2 Place Holding Tabs (F) in center slot as shown and slide into place along
Mount track. Use four tabs on each side.
Workrite
Ergonomics
o
F