Workrite SwingArm–Dual - Manual (Page 10)

10 Workrite Ergonomics, Inc
SwingArm–Dual™ Installation Instructions
Step 6: Final Touches: Cable Management
Thread the monitor cable through the plastic A:
sleeve mounted on the lower side of the mon-
itor arm, taking care to leave enough slack in
the cable for full monitor movement on both
sides of the sleeve.
Secure attached hook and loop strips around B:
monitor cables, again leaving enough slack at
both ends of the arm for full movement of the
arms.
Attach the monitor cables to the pole and C:
secure with the Velcro® straps, again leaving
enough slack between the extension arm and
the pole for full movement of the arm.
Strip
Strip