Coway BA07-R - Manual (Page 21)

21
Main
tenanc
e
CLEANING METHOD
Nozzles
1. Press nozzle cleaning button on the right side of the
bidet.
The nozzle cleaning water is sprayed and the front cleansing nozzle
sticks out to its full length.
Clean the front cleansing nozzle.
2. Press nozzle cleaning button one more.
- The nozzle cleaning water is sprayed and the front cleansing
nozzle retracts itself, and the rear cleansing nozzle sticks out to its
full length.
- Clean the rear cleansing nozzle.
3. If you press the stop button on the remote control
or nozzle cleaning button on the product once more
after cleaning the rear cleansing nozzle, the nozzle
cleaning water is sprayed and the rear cleansing
nozzle retracts itself.
- If no button is pressed for 2 minutes after the nozzle cleaning
starts, the nozzle retracts itself automatically.
Product body
 Apply the neutral detergent to a soft cloth or sponge
and clean the product.
 If you use the detergent except for the neutral detergent, the
product deformation and the damage may be occurred.
INST
ALL
ATION
| Installa
tion the P
roduc
t / CLEANING ME
THOD
| No
zzles
| P
roduc
t B
ody
 If excessive force is exerted on the nozzle when cleaning it, the nozzle may not be
working properly or be broken. Hold the nozzle lightly to clean it.
 When you clean the nozzle, the nozzle cleaning water is sprayed (But the nozzle
cleaning water doesn’t be sprayed and only nozzle is extended in the feed water
stop status).
Tips
Do not use thinner, or benzene. Do not clean the product using coarse scrub or
detergent with abrasives.
Tips
1014692 BA07 »з¿л¼³¸н¼- ¹МБЦЗв_(08.09.10).indd 21 2008-09-10 ¿ААь 11:37:18