Preset tones – Casio CT-636 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preset Tones
* Refer to the general guide found on page 4-5 for exact locations of this keyboard controls and
connections.
* To select a preset tone
0 Press the tone SELECT button to switch between the two tones assigned to
each TONE selector. When the SELECT indicator is lit, you can select one
of the lower tones (16—30). When it is not lit, you can select one of the upper
tones (1—15).
Press a TONE selector to choose a preset tone.
*
PIANO tone is automatically selected whenever you switch the power of the keyboard ON.
' To select percussion sounds
When PERCUSSION sound is selected by the tone selector, the keyboard
keys can be used to play a total of 61 different built-in percussion sounds.
These sounds afe assigned to respective keys as shown below;
oe O
0
o
4.
Preset Tones
Dual bass sounds
When BASS sound is selected by pressing the BASS button (one of the tone
selectors), two different bass tones can be played on the keyboard at the
san^e time.
The WOOD BASS tone sounds on the lower half of the keyboard (C2—B3),
while the SLAP BASS tone sounds on the upper half (C4—C7).
Wood bass (C2—B3)
Slap bass (C4—C7)
bass drum 1/2/3
gated snare drum
snare drum 1/2/3
# synth. snare drum
# rim shot 1/2
0 dosed hihat 1/2
sample percussion 1/2
open hihat 1/2
0 synth. cymbal 1/2/3
crash cymbal 1/2/3/mixed
ride cymbal 1/2
gong 1/2
0
tom 1/2/3/4/mixed
0
synth. tom 1/2/3
cow bell 1/2
triangle open/mute
0
timbales; high mute/high/low/mixed
0
computer game sound 1/2/3
0
agogo; high/low
scratch; fast/slow
conga; high mute/high/middle/low/
mixed
0
brass hit 1/2/3
0
clave high/low
-
8
-
-
9
-