Tone bank sound combinations – Casio CT-636 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tone Bank Sound Combinations
*
Refer to the general guide found on page 4-5 for exact locations of this keyboard controls and
connections.
i This keyboard features Casio's innovative "'Tone Bank'' feature, which lets
® you choose from an amazing total of 465 different sound combinations.
To create these layered sounds, the Tone Bank function actually integrates the
characteristics of the 30 preset tones. You can select these sound combinations
through the following procedure.
* To select Tone Bank Sound Combinations
® Select any of the 30 preset tones. When selecting Tone Bank sounds, the
tone initially selected is used as a base, or "Primary" sound.
*
When the Primary sound is selected, the keyboard features 10-note polyphony.
(2) Press the TONI^ BANK button.
This activates the Tone Bank function, allowing you to choose a Secondary
sound to integrate with the Primary sound you just selected.
*
After the TONE BANK button is pressed, the keyboard changes to 5-note polyphony.
Select any other of the 30 preset tones. The characteristics of this
"Secondary" sound is automatically integrated with those of the "Primary
sound already selected.
f f
5. Tone Bank Sound Combinations
<
Example of Tone Bank Operation >
Look at the 465-SOUND TONE BANK list on the keyboard. Here, let us produce
the TONE BANK sound "4 6 BRASSH ORGAN".
The two numbers to the left of the TONE BANK sound name are preset tone
numbers. The number 4 represents the "Primary" sound, while 6 is the
"Secondary" sound. Basically, the 465-SOUND TONE BANK list indicates that
if you mix preset tone "6 BRASS ENS" with preset tone "4 JAZZ ORGAN”, you
will get BRASSH ORGAN.
preset tone numbers
ОЙСАН
»» онем
tone selector
To select a different secondary sound
The secondary sound can be changed at any time, as long as the Tone Bank
function is selected. Simply select a different preset tone—the primary sound
remains the same.
To select a different primary sound
The primary sound tan be changed by first turning the Tone Bank function
OFF (press TONE BANK button so that indicator goes out), selecting any other
preset tone, and finally turning the Tone Bank function back ON. The secon
dary tone remains the same in this case.
I
4
• To select "4 6 BRASSH ORGAN"
0 First, select preset tone 4, JAZZ ORGAN. This first selection becomes the
"Primary" sound.
Press the TONE BANK button. At this time, the TONE BANK indicator above
the button should light.
Select preset tone 6, BRASS ENS. This selection becomes the "Secondary"
sound.
BRASSH ORGAN is now selected. The following is a summary of the above
operation.
4 6 BRASSH ORGAN =
Pkii
CNtAK
Ч-
TONS BANK
О
tlUMi
(Ж
-
10
-
-
11
-