Cobra Electronics High Performance 10 Band XR-1010 - Manual (Page 11)

Operation
Memory Set
Your Cobra® XR-1010
features an automatic
internal electronic memory
system. It will automatically
“remember” your settings
when the unit is turned
“OFF” or removed from
power source.
Voice Alert™ Mode
ᕡ Press and hold
MUTE button for more than
two seconds to switch between Voice and
Tone Mode and Tone Only Mode.
Voice Alert™
Mode
Note
Voice Alert™ is the factory
default setting.
Detection
15
When Voice Alert™ is selected “Voice Alert™”
will be heard. A “beep” will be heard when Tone
Mode is selected.
Memory Set
Automatically remembers settings of Dim, Muting
and City/Highway modes.
Auxiliary Audio Jack
Use to connect an external speaker to your Cobra®
XR-1010 in environments with high ambient noise
levels.The internal speaker will be disconnected.
Auxiliary
Audio Jack
PRESS &
RELEASE
Audible Alarm
Speaker and
Voice Alert™
Band
Detection
Instant-On Detection
The Cobra® XR-1010 is also designed to detect
Instant-on speed monitoring signals. Immediate
action is required when warning is given.
Audible Alarm Speaker
In Tone Mode a different alert tone will sound for
X, K, Ka, Laser (a distinctly different tone for each
of the four laser signals: LTI 20-20*, Ultra Lyte*,
ProLaser* and ProLaser lll*, VG-2, and Safety and
Strobe Alert™ signals.
Band Detection
This detector is designed to detect X, K,
Superwide Ka Band Radar, Laser (including LTI
20-20*, Ultra Lyte*, ProLaser* and ProLaser III*
technologies), VG-2, Safety Alert® and Strobe
Alert™* signals.
*360˚ Detection
14