Cobra Electronics High Performance 10 Band XR-1010 - Manual (Page 9)

Operation
Highway/City Mode
To select City Mode:
The Highway/City function is controlled by a
2-step button.
Highway/City
Mode
Note
Use City Mode in or near
cities where there are many
sources of false radar
signals such as microwave
relay towers and automatic
door openers. This will filter
out weak signals.
Note
The unit will announce
“Highway” or”City” in
Voice Mode.
Note
City =“Beep”
Highway =“Beep-Beep”
11
Operation
10
Dim Button
You may select from four levels of brightness for
your Cobra® XR-1010 display: Bright, Dim, Dimmer
and Dark (Off).
Dim Button
Note
Bright = “Beep-Beep”
Dim = “Beep”
Dimmer = “Beep”
Dark = “Beep”
Note
The XR-1010 will retain the
chosen mode while OFF.
Note
The XR-1010 will retain the
chosen brightness level
while OFF.
PRESS &
RELEASE
ᕡ Press and release Dim button once to reduce
brightness to Dim. A single beep confirms this
selection.
ᕢ Press and release
Dim button a second time
to reduce the display brightness to Dimmer.
A single beep confirms this selection.
Press and release
Dim button a third time
to reduce display to Dark (Off ). A single beep
confirms this selection. The power light will
remain on.
Press and release
Dim button a fourth time
to return display to Bright. A double beep
confirms this selection.
4
In Voice Alert™, the
message “Bright, Dim,
Dimmer, or Dark” will be
heard.
Highway/City Mode
To select Highway Mode:
Press and release City button. A double beep
confirms Highway mode.
ᕡ Press and release City button and Cty will be
displayed. A single beep confirms City mode.
Cty
PRESS &
RELEASE
3