Clarion VMA7483 - Manual (Page 11)

VMA7483
11
English
Owner
’s Manual
RGB button
Switches between video and RGB
display.
WIDE button
Each time this button is pressed, the
display changes in the following
order: NORMAL
→
WIDE
→
F. WIDE
→
CINEMA
→
NORMAL.
Adjust button
Displays the image adjustment
screen and allows you to select
BRIGHT, HUE or COLOR.
MONITOR button
Turns the monitor screen on and off.
● Remote control operation
Aim the remote control unit at the remote control
sensor (supplied) within a 30
°
horizontal and
vertical angle.
30˚
30˚
Reception sensor window
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
2. Insert the AA (UM-3/1.5V) batteries that came
with the remote control unit facing in the di-
rections shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to ex-
plode. Take note of the following points:
•
When replacing batteries, replace both batter-
ies with new ones.
• Do not short-circuit, disassemble or heat bat-
teries.
• Do not dispose of batteries into fire or water.
• Dispose of spent batteries properly.
Rear side
AA (UM-3/1.5V)
Batteries
Rear cover
Remote Control