Chariot Carriers Captain XL - Manual (Page 19)

19
Push the two safety fl ag rods together and guide the bottom
end of the rod through the cord loop at the back left side of
the two-in-one weather cover. Push the end of the rod into
the sleeve located at the lower left corner of the passenger
compartment until it can go no further.
Assembly
Assembling the refl ectors and safety fl ag
If you want to use your Chariot as a Bicycle Trailer, all refl ectors
and safety fl ags must be installed.
Exception: If you use tires with refl ective strips, the spoke
refl ectors can be left off.
Position a spoke refl ector between two outer spokes and an
inner spoke in such a way that the inner spoke lies in the guide
slot of the refl ector.
Guide the plastic clip with its slot over the inner spoke into the
hole of the refl ector and secure by tightening it a quarter turn
using a screwdriver.
Attach two
refl ectors on each
wheel (as shown,
opposite each
other to the right
and left of the
valve).
For fastening the front and rear refl ectors you need a Philips
screwdriver.
Screw the red refl ectors into the rear grommets on the
passenger compartment.
Screw the white refl ectors into the front grommets on the
passenger compartment.