Garmin GPSCOM 190 - Manual (Page 47)

R e f e r e n c e
Frcquenc}^
Selection
H x e i
119.8B sTsv
CHRH&E^ L
INSERT'?
msm^ :
3_______
Removing a frequency from
memory.
Memory Changes (cont.)
To insert a frequency into memory;
1. Highlight the frequency field and press i
2. Use the arrow keypad to select 'INSERT?'.
3. Enter the new frequency.
4. Press CB confirm.
To remove a frequency in memory:
1. Highlight the frequency you wish to remove and press
2. Select 'REMOVE?'
3. Press'
Emergency Channel Selection
1. Press and hold
} r
1 1 2 1 . 5 0
IScciii
1 Rci
i| jSeek|
] ! wrt 1
Signal Strength
u s
The GPSCOM 190’s emergency channel selection fea­
ture provides a quick method of selecting the 121.5 MHz
frequency as the active frequency in the event of an in­
flight emergency. The feature is available whenever the
unit IS on, regardless of GPS or communication status, or
in the unlikely loss of the of display.
To select the 121.5 MHZ frequency as the active
frequency:
1. Press and hold
To transmit on the emergency frequency:
1. Press the PTT switch.