Rubber bumper, Accessories & installation – Garmin GPSCOM 190 User Manual
Page 92
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A variety of other accessories are included with the
GPSCOM 190:
Carrying Case
A durable nylon carrying case comes with a belt
attachment on the back. A side pocket is included for
easy storage of the com antenna.
Belt cup
The GPSCOM 190 includes a sturdy belt clip so you
can carry the unit with you wherever you go. To attach
the clip you will need to remove the rubber bumper from
the back of the unit. Attach the clip using the two screws
just removed from the bumper as shown in the figure
below.
Rubber
Bumper
Flex Com Antenna Removal
To remove the flex com antenna:
1.
Squeeze the base of the antenna and turn counter
clockwise until the antenna disengages from the con
nector on the unit
2.
Pull up gently and remove.
APPENDIX A
Accessories &
Installation
To attach the
wrisi strap,
thread the strap through the
slot in
the rubber bumper or
the belt
clip.
Next, take the
solid end
oj
the strap, insert
it tfirougfi the
eye oj at the
other end,
and tighten.
Removing
the flex com
antenna.