Cambridge Audio PS2000 - Manual (Page 8)

8
Dipole Unit Stand
Align the Dipole Unit Stand to the Dipole Unit. Using the Ball-fastener provided,
attach the Dipole Unit Stand to the Dipole Unit, (see diagram A).
Tilting the Dipole Unit
Loosen the Ball-fastener below the Dipole Unit Stand to adjust the tilt of the Dipole
Unit. The Dipole Unit can be angled to face you by moving the Dipole Unit back or
forth (see diagram B). Tighten the Ball-fastener once the optimum tilt has been
achieved (see diagram C).
Dipole Unit Stand Installation
A
Ball-fastener
Dipole Unit Stand
B C
PS2000 Digital_UK.book Page 8 Thursday, August 3, 2000 10:53 AM