Cabletron Systems 2M46-04R - Manual (Page 124)

Chapter 5: Local Management
5-76 2M46-04R/2M46-04RDC User’s Guide
reset:
Syntax: reset
Description: This reset command initiates a hardware reset
of the device. The reset command initializes the
CPU processor, runs the onboard diagnostics,
and restarts the software image, which restores
the user configuration settings from NVRAM.
The user will be queried to confirm the reset
command to ensure against unwanted resets.
Options: Not Applicable
Example:
show:
Syntax: show [protocol] <table>
Description: The show command displays information
concerning various components of the device.
Protocols currently supported are IP, IPX,
DECnet, and AppleTalk. Components of those
protocols that are currently supported are ARP
caches, route tables, FIB tables, server tables,
and interface tables. The number of valid
entries in the table will be displayed at the end
of the table display.
Options: Not Applicable
NOTE
The Network Tools connection to the device will be terminated
upon execution of this command.
-> reset
174245
RESET: Are you *SURE*? ->Y