Cabletron Systems 2M46-04R - Manual (Page 43)

Using LANVIEW
2M46-04R/2M46-04RDC User’s Guide 4-3
RX
(Receive) Off No link. No activity.
Port enabled or
disabled. None.
Green Solid. Port enabled,
link, no activity. None.
Blinking. Port
disabled, link. None.
Amber Flashing. Port
enabled, link, activity. None.
Red Diagnostic failure. Contact the Cabletron
Systems GCC.
TX
(Transmit) Off Port enabled, and no
activity.Should flash
green every two
seconds indicating
BPDUs being sent if
STA is enabled and
there is a valid link. 1. Ensure that the STA is
enabled and that there is a
valid link.
2. Contact the Cabletron
Systems GCC.
Green Flashing. Indicates
activity. Rate indicates
data rate. None unless a high rate of
collisions exist. If so, check
network configuration.
Green Blinking. Port
disabled, link. None.
Amber Blinking. Port in
standby. Port may be
disabled due to
Spanning Tree. 1. Ensure that the port is not
disabled.
2. Contact the Cabletron
Systems GCC.
Red Flashing. Indicates
collision rate. None.
Solid. Diagnostic
failure. Contact the Cabletron
Systems GCC.
Table 4-1 LANVIEW LEDs (Continued)
LED Color State Recommended Action