Cabletron Systems 2M46-04R - Manual (Page 88)

Chapter 5: Local Management
5-40 2M46-04R/2M46-04RDC User’s Guide
Figure 5-17 System Resources Screen
The following briefly explains each field of the System Resources screen:
CPU Type (Read-only)
Indicates the microprocessor used in the 2M46-04R.
Flash Memory Installed (Read-only)
Indicates the amount of FLASH memory installed in the 2M46-04R and
how much is currently available.
DRAM Installed (Read-only)
Indicates the amount of DRAM installed in the 2M46-04R and how much
of it is currently available.
NVRAM Installed (Read-only)
Indicates the amount of NVRAM installed in the 2M46-04R and how
much of it is currently available.
Current Switch Utilization (Read-only)
Shows how much (percentage of switch capacity) of the 2M46-04R is
currently being used.
Firmware Revision: XX.XX.XX
System Resources
2314-23
Device Type: 2M46-04R
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : XX MB
DRAM Installed: XX MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 25 Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
2M46-04R LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN EXIT