Cecilware IC-25A - Manual (Page 4)

HOW DOES YOUR INDUCTION HOB WORK?
A high frequency (20-35KHz) induction coil located underneath the ceramic top plate
heats the cooking pan by magnetic friction. The heat is produced directly within the pan.
It's controlled by an electronic circuit to offer superior performance and functions. During
cooking, no energy is lost between the hob and the food. When you switch it off, the
cooking is stopped immediately
.
PRECAUTION BEFORE USING YOUR INDUCTION HOB
1. The glass top is made of strong, hard, and non-porous properties. But, in case of breakage,
even if it's only slightly cracked, disconnect the appliance from the electrical socket immediately
and contact the after-sales service.
2. The appliance is equipped with a Small Object Detector. It's recommended not to place small
metal kitchen utensils such as pan lids, knives, or other metal objects on the induction-heating
zone. If the inductor is switched on, there is a risk of them becoming hot.
3. When using your induction hob, don't place any magnetic sensitive objects on the glass top,
such as credit cards, cassettes, etc.
4. Scientific tests have shown that the induction hob presents no danger for anyone using a
pacemaker. Please keep a 2’ distance from the unit while the induction hob is in use.
5. To prevent from overheating, do not place aluminum foil or iron plate on the top plate.
6. Put the appliance on a horizontal surface but keep away from wall or articles at least 2” - 4”.
7. To prevent an electric shock, do not put articles like iron wire or tools into the air entrance or
outlet.
8. Immediate clean up is recommended when water is left on the top plate.
OPERATION INSTRUCTION
1. Plug power cord into 120V, 60Hz, 15A (IC-18A); 208V, 60Hz, 11A (IC-22A); 240V, 60Hz, 11A
(IC-25A) dedicated electrical circuit.
2. Turn power on by pressing the power on/off button.
3. Rotate the power control knob clockwise. The power level LED will display from level 1 (Min.) to
level 9 (Max.). If you turn past 9 it will start at 1 again. The same applies if you turn back past 1.
4. Put a suitable pan in center of the top plate, and rotate power control knob to desired power
level.
5. Heating Indicator Light indicates if the pan is suitable or not. If the Heating Indicator Light is
on, then the pan is heating. If the Heating Indicator Light is off, it means the power is on, but no
pan or suitable pan is on top plate.
6. This unit is equipped with an Over Heating Protection Device, which stops power temporarily
when top plate temperature reaches 482
°F
(+/- 10%). The power will start again automatically
when the temperature of the top plate is reduced below 482
°F
(+/- 10%) . By heating an empty
pan, maximum temperature will be reached very quickly. The Heating Indicator Light will flash to
indicate the over heating protection function is on.