Cecilware IC-25A - Manual (Page 5)

Temperature Hold function: By pressing the “Warm” function key, the Temperature Hold
function will start working. The LED indicates the temperature will hold at 140
°F
(+/- 5%) , push
“Warm” function key again, the LED indicates the temperature will hold at 180
°F. When the
“Warm” function key is pushed each time, the holding temperature will change as follows: 140
°F
-> 180
°F -> 285°F -> 360°F -> 430°F -> 140°F ->.
7. With the Temperature Hold function working, the “Warm” indicator light will start flashing. It
means the temperature has not yet arrived at the set temperature. When the pan’s temperature
arrives the set temperature, the “Warm” indicator light will stay on.
8. To change Temperature Hold function to “Heat” function: Push “Heat” function key, and the
function will go back to “Heat” again. Then the rotary control knob will be activated again.
Control Panel:
1. Power On/ Off Key
2. “Heating” Indicator Light
3. “Heat” Function Indicator Light
4. “Warm”(Hold Temperature) Function Indicator Light
5. “Warm”(Hold Temperature) Function Key
6. “Heat” Function Key
7. Power Level / Holding Temperature Display LED Lights
8. Power Regulator Rotary Knob
1
2
3
4
5
6
7 8