Crimestopper Security Products CS2016 Dpfm - Manual (Page 26)

26
2-VEHICLE OPERATION
The CS-2011DP, CS-2012DP-TW1, CS-2014DP-TW2 and CS-2016DP-FM systems can be used for 2 car
operation. A single remote can control two independent vehicles with identical systems installed, for example, two
2011’s or two 2016’s.
NOTE: These systems ARE NOT interchangeable. A CS-2011DP system remote CANNOT control a CS-
2012DP-TW1, CS-2014DP-TW2 or CS-2016DP-FM system and vice versa!
See diagram below on how to switch your remote(s) to vehicle #2 operation. To set up the 2-Vehicle operation you
must first program your remotes to Vehicle #2. Follow the “Transmitter Programming” steps at the second vehicle
and learn YOUR remote, along with vehicle #2’s existing remotes.
VEHICLE #2 CONTROL:
CS-2012DP-TW1
Press & hold side button
for 5 seconds, Remote will
beep twice then you have
15 seconds to control
vehicle #2.
CS-2014DP-TW1
Press & hold side button
for 2 seconds to change
vehicles. A numeral 1 or 2
will appear in upper right
corner of LCD screen.
START
PM
CS-2016DP-FM
Press & hold side button
for 5 seconds. Remote
will beep and "II" icon will
appear in lower right LCD screen.
CrimeStopper
CS-2011DP &
Press & hold 2 seconds to
control vehicle #2.
"Sidekick"
START