Cabletron Systems 9A100 - Manual (Page 32)

2-14 SmartSwitch 9A100 User Guide
SmartSwitch ATM Administrator Switch Installation and Setup
SmartSwitch ATM Administrator can be installed on a PC running Windows NT 4.0, Windows NT 3.51, or Windows
95, and requires the following PC hardware configuration:
U
Pentium 133 Mhz or faster processor
U
20 MB disk space
U
32 MB RAM
U
Monitor with resolution of at least 800 x 600 pixels
U
Network connections (either Ethernet or ATM) to the switches you manage
2.6.1 Installation Steps
The installation process for SmartSwitch ATM Administrator is essentially the same for all the supported operating
systems. Follow these instructions for installation on NT 4.0, NT 3.51, or Win95.
s• If you are using diskettes, make backup copies of the SmartSwitch ATM Administrator diskettes. Put
the original diskettes in a safe place; use them if your backup copies become unusable. Use your
backup copies to complete the installation procedure.
¢• Load Disk 1 into drive a or note the network <path> to the directory that contains the
SmartSwitch ATM Administrator files.
•• Start the installation software:
†
NT 4.0 or Win95, click Start then click Run
†
NT 3.51, select the File menu and click Run
T• Enter a:\setup.exe to install from drive a:
OR <path>\Disk1\setup.exe to install from the network
Q• The Software License Agreement dialog box appears. Follow the instructions on the screen and click
Yes to proceed.
–• The Welcome dialog box appears. Read the instructions and click Next to proceed.
•• The Choose Destination Location screen appears. Follow the instructions on the screen and click
Next. Setup performs the following tasks:
†
Copies several files to c:\ZXAdmin or to the destination you specified
†
Creates a program group called SmartCell ZX Network Management Tools (Common)
†
Creates icons in the group:
SmartSwitch ATM Administrator – starts the application
Online Help – starts the online help
Readme – displays release notes
UnInstall SmartSwitch ATM Administrator – removes the application from your PC
G• The Setup Complete dialog box appears. Read the message and click Finish.
n• The Information dialog box appears. Click OK.