Assembly – Panasonic TYST65PF1 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assembly
w
"5)
c
LU
4.£>et the display to the desired height by
selecting from the options (4).
From the table below, select the screw
holes for fixing the mounting brackets ®
to the fittings (top/bottom) ®.
Unit: mm
Mark
Center of screen
(Distance from the floor surface)
A
1047
B
1147
C
1247
D
1347
5. Using the screw holes selected in step 4,
fix the mounting brackets ® to the
fittings (top/bottom) ® with the bracket
assembly screws ® (8) and insert nuts @
(8).
(Tightening torque: 1.8 to 2.2 N-m)
6. Fix the shelf plate ® (1)to the back of
the bottom fitting with the shelf plate
attachment screws ® (4). (It can be
attached to either the right or left side.)
(Tightening torque: 1.2 to 1.5 N-m)
26