Allen Sports SST1 - Manual (Page 7)

INSTRUCTIONAL
OWNER’S MANUAL
p
FOLDING FOR STORAGE AND TRANSPORT
PARKING BREAKS
STEP 2:
STEP 3:
STEP 4:
STEP 5:
STEP 6:
STEP 7:
STEP 8:
STEP 9:
NOTE:
NOTE:
STEP 1:
Unclip the tow bar safety strap from the “D” ring, and remove pin to
remove hitch from frame.
Remove children and all cargo from inside the passenger compartment.
Your trailer is equipped with a strap parking brake for added safety. When loading or unloading or parking your trailer,
engage the parking brake to prevent the trailer from moving.
Figure 22 shows the strap brake on the trailer, Fig23 shows the strap brake in operation, as it loops through the spokes,
and Fig 24 shows the brake clipped and locked. For safety, when not in use, wrap the strap around the frame and clip it in
the closed position to fix to the frame.
Clip the end of the strap back on to the tow bar “D” ring.
Remove the flag and pole and separate the three sections.
Remove the quick-release pins form the stub axles of the rear wheels.
Remove the quick-release pin from the tow bar bracket at the front corner of
Fold the tow bar back under the trailer, and replace the quick-release pin through
the tow bar and U-channel
Place wheels and flag inside the passenger compartment, and close the front cover.
Fold upper cabin as shown above:
a. Remove 4-season Rain cover
b. Remove QR pin from both sides.
c. Fold frame down as shown.
d. Fold in until trailer is flat
Store trailer in a cool, dry environment, away from direct sunlight. After extended
periods of storage, check tires for wear or cracking, and fabric and strapping
for signs of wear. After extended periods of storage, it is recommended that the
trailer is inspected by a qualified bicycle mechanic prior to use.
FIGURE 22. FIGURE 23. FIGURE 24.
7