Safety instructions, Warning - read the following before proceeding, Warning: this equipment must be earthed – Allen&Heath ZED POWER User Manual

Page 6: Caution, Read instructions, Do not remove cover, Power sources, Power cord routing, Grounding

Advertising
background image

Allen & Heath 6

ZED POWER 1000

WARNING - Read the following before proceeding:

WARNING - THIS APPARATUS MUST BE EARTHED.

CAUTION - HOT SURFACE, AVOID CONTACT.

CAUTION

Made in the UK by ALLEN & HEATH

SERIAL No:

T 3.15A 20mm 220 - 240V~

T 5.0A 20mm 100 - 120V~

FUSE TYPE AC SUPPLY

47-63Hz

320VA MAX

300W MAX

AC MAINS IN ~

ATTENTION: RISQUE DE CHOC ELECTRIQUE – NE PAS OUVRIR

Read instructions:

Retain these safety and operating instructions for future

reference. Adhere to all warnings printed here and on

the console. Follow the operating instructions printed in

this User Guide.


Do not remove cover:

Operate the console with its covers correctly fitted.

Power sources:

Connect the console to a mains power unit only of the

type described in this User Guide and marked on the

rear panel. Use the power cord with sealed mains plug

appropriate for your local mains supply as provided

with the console. If the provided plug does not fit into

your outlet consult your service agent for assistance.


Power cord routing:

Route the power cord so that it is not likely to be walked

on, stretched or pinched by items placed upon or

against it.

Grounding:

Do not defeat the grounding and polarisation means of
the power cord plug. Do not remove or tamper with the

ground connection in the power cord.

!

WARNING: This equipment must be earthed.

SAFETY INSTRUCTIONS

Advertising