Home Styles 9001-0011 - Manual (Page 2)

Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
STEP 1
STEP 2
Attach the Side Panel (B) to the
Base (C).
Tighten up the Head Cap Bolts.
Attach the Back Piece (D) on the Base rear.
Tighten Head
Cap Bolt by
Hex Wrench.
B
D
C
C
Attach four Casters to
the underneath of the Base (C).
Locking Caster
Locking Caster
Head Cap Bolt
Wood Screw