Home Styles 9001-0011 - Manual (Page 5)

Assembly Instructions
Unit Part List
P3.
Side Part
1 pc.
P4.
Side Part
1 pc.
P5.
Base
1 pc.
P2.
Back Part
1 pc.
P2
P2
P5
P5
P3
P4
P4
P4
P3
P3
P1
P1
P1
(Fig) 2
(Fig) 3
(Fig) 4
(Fig)1
(Fig)2
(Fig)3
(Fig)4
HARDWARE LIST
Pull Handle
1 pc.
Machine Screw
for Pull Handle
2 pc.
Wood Screw
(for Base)
6 pcs.(+1 extra)
Wood Screw
(for Side Part)
8 pcs.(+1 extra)
(Fig) 1
P1.
Front Part
1 pc.
88 9001 001 C
Drawer (P)
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
Slide the Plywood Base (P5) into the grooves
on side parts. Be sure to push the Base all the
way forward so it meets the Front Part.
Insert the remaining ½” screws (6 pcs.)
into the pre-drilled holes at the Base,
then tighten up all screws.
Assemble the Pull Handle
to the Front Part with
Machine Screw.
Assemble the Front Part (P1), Back Part
(P2) and Side Part (P3) and (P4).
Using a
Phillips screw driver, insert 1”
screw into the pre-drilled holes at the
side parts, tighten half way.