Clarion APX2181 - Manual (Page 24)

English
24
8. SPECIFICATIONS
Note:
The technical data and the design of the equipment may change
without prior notice for the sake of technical improvements.
APX Amplifiers
Parameter APX4361 APX2181
Maximum power output 170W x 4 170W x 2
Continuous rated power 90W x 4 90W x 2
Typical power in bridged mode 320W x 2 320W x 1
Typical power in 2-Ohm load 160W x 4 150W x 2
THD (1KHz, 10W, 4 Ohms) 0.05% 0.05%
IM distortion 0.08% 0.08%
S/N (A-weighted) 86dB 86dB
Floor noise 2mV 2mV
Channel separation 70dB 70dB
Frequency response 10Hz to 50kHz 10Hz to 50kHz
Line level input sensitivity 200mV to 8 Volts 200mV to 8 Volts
Speaker level input sensitivity 600mV to 20 Volts 600mV to 20 Volts
Input impedance 33K Ohms 33K Ohms
Allowable battery voltage 10.5 to 16.5 Volts 10.8 to 16.5 Volts
Size 12-1/4"x10-1/8"x2-3/8” 10"x10-1/8"x2-3/8"
These specications are Amplier Power Standard CEA-2006 Compliant.
APX_DPX Amps.qxd 2/6/2008 11:53 AM Page 24