Industrial Injection 5.9L Dodge Cummins Dual CP3 - Manual (Page 4)

Dual Fueler CP3 Pump Kit 03-07 5.9L Dodge Cummins Dual Fueler CP3 Pump Kit 03-07 5.9L Dodge Cummins
4 5
10. Install #8a Fuel Pump Bracket to the top front of the engine as
shown below with 3 supplied #8b bolts.
11. Install #6a Fuel Pump
by sliding into position onto
bracket, and bolt on with 3
#6b
5/16-18 bolts . See figure to the
right. The longer #6b bolt is on
arrow #3 .
5. Remove 6 bolts on the
assembly for the transmis-
sion kickdown as shown.
The transmission kickdown
will be relocated.
6. Install #16a Radiator
Pipe as shown with stock
bolt making sure to reattach
ground wire as shown.
7. Install #14 Dipstick
Support bracket by using
the stock bolt on arrow 1,
and the supplied
#14 bolt,
washer and nut on arrow 2.
1
2
8. Install #12a Transmission
Kickdown bracket as shown
by using the 3 #12b bolts
washers and nuts as shown.
On arrow 2 , use the longer
12b bolt and don’t secure the
nut or washer until the next
step.
2
1
3
9. Secure Transmission Kickdown by bolting onto #12a Transmission
Kickdown Bracket with #13b Transmission Kickdown Support Bolts
as shown ( fig. 9a ), and secure #13a Transmission Kickdown Support as
shown ( fig. 9b ). Use the longer #13b bolt on Arrow 3 , and secure the
other end of #13a with the longer bolt from #12b in step 8 ( Arrow 4 ).
2
1
3
3
4
Transmission Kickdown
Transmission Kickdown
fig. 9a
fig. 9b
3
1
2