M2TECH hiFace Dac - Manual (Page 11)

hiFace DAC
384
k H z /32bit digital-TO-ANALOG CONVERTER
REVISION 1.1 – MAY 2013
Copyright © 2013, M2Tech Srl
11
M2Tech
www.m2tech.biz
5. Windows driver installation
5.1. Obtaining the driver
The Windows driver for hiFace DAC is available on the M2Tech website, in the download
page (
www.m2tech.biz/download.asp ). Download the exe file containing the driver
package and save it to a folder in your PC. This is a self-extracting file which will deliver a
folder. Double-click on it to extract the folder. Please pay attention to the location where
the folder will be extracted to avoid losing it into the hard disk (Figure 4).
Figure 4
5.2. Installing the driver on a Windows-based PC (XP, Vista, Windows 7
and Windows 8, 32 & 64 bits)
Uninstall older driver version if already installed (see section 5.3). Then follow the
instruction to successfully install the driver. Please note that the pictures in this Section are
taken from installation process for either Window 7 and Windows 8: the process is
basically the same and also applies to Windows XP and Vista.
Open the folder produced by the self-extracting exe file. Double-click on “setup.exe” and
follow the indications provided by the setup program. First, the installation wizard will ask
for authorization to start installation (Figure 5). Accept.