M2TECH hiFace Dac - Manual (Page 21)

hiFace DAC
384
k H z /32bit digital-TO-ANALOG CONVERTER
REVISION 1.1 – MAY 2013
Copyright © 2013, M2Tech Srl
21
M2Tech
www.m2tech.biz
Figure 17
Then, select the “Voice” Tab. Again, select “M2Tech Audio 2.0 Output” in the drop-down
menu of the Playback area. Click on OK button. Please be adviced that even if the
peripheral is listed as “kernel streaming”, it will operate in Direct Sound mode when listed
here.
From now on, unless hiFace DAC is disconnected or settings are changed again, hiFace
DAC is the audio peripheral all audio programs will use when operating in direct sound
mode.
6.1.2. Configuring for ASIO with Windows XP
ASIO has no standard setting in Windows XP. ASIO must be selected in the specific
player you choose to use.
For example, when using FooBar, with hiFace DAC connected to the PC, go to the
File/Preferences/Playback /Output tab and select “ASIO: hiFace DAC” as output device.
Other players will require different settings (see section 5).