M2TECH Evo Dac - Manual (Page 7)

E vo DAC
HIGH PERFORMANCE 192/32 DAC
REVISION P r A – SEPTEMBER 2011
Copyright © 2011, M2Tech Srl
7
M2Tech
www.m2tech.biz
3. Back Panel
S/N:
OUTPUTS
I S 2
OPT
COAX RIGHT LEFT
M2TECH
8 9 10 11 12
Figure 2
8) I
2
S input. Connect the I
2
S output of the hi
F ace E vo to this input using a straight CAT-5
cable (not included). Please avoid using long cables in order to preserve the great jitter
performance of this connection. 50cm or 1m cables are preferred. This input allows for up
to 192kHz operation and up to 32 bits resolution.
9) Toslink
TM
input. Legacy Toslink
TM
receiver for compatibility. Connect this input to the
Toslink
TM
output of a digital source (CD player, digital receiver, computer…) using a
Toslink
TM
optical fiber interconnect. This input allows fro up to 96kHz operation and up to
24 bits resolution.
10) S/PDIF input. Connect this input to the S/PDIF output of a digital source (CD player,
digital receiver, computer, hiFace…) using a 75 Ohms digital interconnect. This input
allows fro up to 192kHz operation and up to 24 bits resolution.
11-12) Analog outputs. Connect these outputs to the inputs of a preamplifier or integrated
amplifier using an RCA interconnect, following the color codes: red is for right channel,
while white or black are for left channel. These outputs should not drive a power amplifier
directly.