M2TECH Evo Dac - Manual (Page 8)

E vo DAC
HIGH PERFORMANCE 192/32 DAC
REVISION P r A – SEPTEMBER 2011
Copyright © 2011, M2Tech Srl
8
M2Tech
www.m2tech.biz
4. Connections
Connect the digital source(s) to the
E vo DAC
(Page 7, nos.8-10) using suitable
interconnects.
Connect the analog outputs of the
E vo DAC
(Page 7, nos.11-12) to the preamplifier or
integrated amplifier. DO NOT connect these output directly to a power amplifier: no volume
control is available, so very high levels are obtained which could damage the
loudspeakers.
Connect the output plug of the wall adaptor or
E vo S UPPLY to the supply connector (Page
6, no.1) of
E vo DAC
.