Magnum Dynalab MD-309 - Manual (Page 14)

- 14 -
SPECIFICATIONS
Power Output
Audio Frequency Response (+/-0.1dB)
Signal to Noise Ratio
Total Harmonic Distortion
Class of Operation
Input Impedance
Output Impedance after volume control
Inputs
Outputs
Output Sensitivity
Fully Balanced Amplifier Design
Safety Diagnostic System
Dynamic Headroom
Dimensions (W.D.H.)
Shipping Weight
Fuse Replacement
Tube Specifications
Warranty (Tubes/Touchscreen)
225 Watts into 8 Ohms, 450 Watts
into 4 Ohms
+ Zero, -0.25dB, 2Hz - 100KHz
-110dB, A Weighted
0.05% at any power
Class A/B, Class A at 1-3 Watts
10k
2k (pre-out)
5 Analog (2 balanced XLR, 3 single
ended including Surround Sound
Processor input), 3 digital (2 Coaxial, 1
USB)
1 line level pre-out
1.2V RMS
10 Sanken Output Transistors per
Phase (40 Total)
Continuous of all Voltages and Current
+3.0 Db
19" x 20" X 6.5"
65 lbs
120V, 10amp slow blow OR 240V,
5amp slow blow
2 x 6922 Magnum Dynalab Cryovalve
1 year/2 years