myCharge Universal Charger 6000 MYC-0902-1RM - Manual (Page 3)

4 5
Thanks for choosing myCharge.
In The Box
• myCharge Universal Charger 6000
• Charging cable with included tips
- Apple 30-pin (1.0A)
- Apple 30-pin (2.1A) — for charging iPads
- Micro-USB — also charges your myCharge
- Mini-USB
• Carrying pouch
• Owner's manual
Section I: Quick Start
1. Charge up your Universal Charger 6000 with the included
USB to Micro-USB cord through your computer or USB AC
power adapter.
2. As Universal Charger 6000 charges, the battery icon will
flash the color of the battery level. When the unit is fully
charged, the battery icon will turn solid green. Press the
level check button to see how much power is available.
3. Universal Charger 6000 comes equipped with two built-in
USB ports and a charging cable with the following tips:
Apple 30-pin, Micro-USB, and Mini-USB. You can also use
your own cable(s) to charge other devices through the USB
ports. Connect your device to one of the ports available.
You must press and hold the Universal Charger's power
button for 3 seconds to begin charging if the unit is not
already turned on.
4. Unplug your device when it's charged, and go! Your
Universal Charger 6000 will automatically power off after
your devices are unplugged.
Section II: Charging Universal Charger 6000
Connect the included charging cable with the Micro-USB
tip through your computer's USB port or a USB AC power
adapter. Times to charge the Universal Charger 6000 vary
based on what it's plugged into. You can expect a full
charge from a USB AC power adapter in about 7.5 hours or
from a standard USB port in about 13.5 hours.
1.0A USB-A Port
Micro-USB Input
Power and battery
level check button
2.1A USB-A Port
Charge from your computer.