myCharge Universal Charger 6000 MYC-0902-1RM - Manual (Page 4)

6 7
As your Universal Charger 6000 charges, the battery icon
will flash according to the energy level:
Solid Green: 100%
Flashing Green: 71–99%
Flashing Yellow: 41–70%
Flashing Red: 0–40%
Note: It is normal for your Universal Charger 6000 to be
warm to the touch while in use.
Section III: Charging Devices
If the Universal Charger 6000 isn't already turned on, press
and hold the power button for 3 seconds to begin
charging.
Up to two devices can be charged simultaneously. The
Universal Charger 6000’s USB ports support the majority of
mobile devices including smartphones, tablets, Bluetooth
headsets, portable navigation devices, MP3 players,
and more.
Section IV: Checking Battery Level
To check how much energy is available, press the
battery level check button. The battery icon will
illuminate accordingly:
Green: 71–100%
Yellow: 41–70%
Red: 11–40%
Flashing Red: 0-10%
After 5 seconds, the LED will turn off.
Section V: Maintenance
To keep your Universal Charger 6000 operating at its full
potential, please do the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VI: Product Specifications
Battery: 6000mAh Lithium Polymer
Micro-USB Input: 5VDC, 1.0A
USB 1 Output: 5VDC, 2.1A
USB 2 Output: 5VDC, 1.0A
Total Output Current: 2.1A
Section VII: Troubleshooting
My device is not charging: Confirm that your device’s
charging cable is properly connected to one of the USB
ports and the Universal Charger itself has energy (by
pressing the battery icon button). If the battery icon is red,
there isn’t enough energy to charge your devices—please
recharge.
For additional troubleshooting information and device
compatibility, please visit: www.mycharge.com