myCharge Trek 2000 RFAM-0164 - Manual (Page 5)

8 9
Section VI: Sound Mode
Trek has built-in tone capability. Tone mode will audibly
inform you when devices are plugged in or disconnected,
and when the unit is charging or has completed charging.
To disable, enable and/or change the sound mode
1. Locate the Sound pinhole button on the back of the unit
2. Plug Trek into your PC
3. Use a paperclip to cycle Tone Silent
If you prefer no sound toggle to the silent mode - unit will
make no sound when this option is selected. If you prefer
tone mode toggle until you hear the tone.
Section VII: Lanyard Strap
Your Trek includes a lanyard strap
for easy portability. To affix it
to Trek, slide the skinny loop of
the strap under the rod in the
opening, then pull the thick strap
through the loop.
Section VIII: Maintenance
To keep Trek operating at its full potential, please do the
following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section IX: Product Specifications
Battery: 2000 mAh Lithium Polymer
Input:
USB-A: 5 VDC, 1.0 A
Output:
Apple 30-pin: 5 V, 1.0 A
Micro-USB: 5 V, 1.0 A
Total Output Current: 5 V, 1.0 A
Sounds