myCharge Portable Power Bank 3000 RFAM-0006 User Manual
Page 4
Advertising
4
Quick Start
1. Unfold the appropriate built-in connector from its storage position and
connect it to the device you want to charge. You can also supply your own USB device
cable and connect it to the full-size USB port.
2. Move the function switch left into the on/charge position (green indicator) to begin charging. (Fig. 1)
3. When finished, move the function switch back into the off/sync position (red indicator) to
prevent unnecessary discharging.
Function Switch
Micro USB Input
Fig. 1
LED Indicators
Level Check
Button
Advertising