Native Union Honeycomb - Manual (Page 10)

9 Once your MM04i will be connected and if it has sufficient
battery, the led2 will light in blue.
If the MM04i is connected but has a low battery level, the led2
will light in red.
Those led are a visual indication, to tell you if the MM04i is
connected or not to your mobile phone, and to indicate you
the battery level.
You can use now your MM04i !
Note : Some phones will connect to the MM04i automatically.
If your phone prompts you to confirm whether you want to
connect to the MM04i, accept the connection request.
If your phone does not connect to the MM04i then use your
phone's Bluetooth menu to initiate a connection manually.
ATTENTION : The Bluetooth ® Wireless technology signal reception works up to a
10m range (open area). If your mobile phone move away further this limit, the
Bluetooth ®
connection will stop and the MM04i will be automatically disconnected.
The Blue led2 will blink to indicate this disconnection.
ATTENTION : If your MM04i is not connected and has sufficient battery, the led2 will start blinking in
blue.
If the MM04i is not connected and has a low battery level, the led2 will start blinking in red.
Sufficient
Battery
Low
Battery